FRC Group - Compression-Type Multi-Lead Sealing Headers

These E-I Glass Seals are super-rugged, feature extremely high strength and are difficult to put under stress. They are absolutely rigid, highly resistant to shock.

Request Information

Unit of Measure

Items	37GF/40W-HS Model 37GF/40W-HS, E-I Compression-Type Multi-Lead Sealing Header	37GF/40W-HP Model 37GF/40W-HP, E-I Compression-Type Multi-Lead Sealing Header	37GF/40T-SX Model 37GF/40T-SX, E-I Compression-Type Multi-Lead Sealing Header	40GF/40W-HS Model 40GF/40W-HS, E-I Compression-Type Multi-Lead Sealing Header	40GF/40W-HP Model 40GF/40W-HP, E-I Compression-Type Multi-Lead Sealing Header
Description	N/A All charted information below, with the exception of part numbers and pin extensions, applies also to type 37 GFR.	N/A All charted information below, with the exception of part numbers and pin extensions, applies also to type 37 GFR.	N/A All charted information below, with the exception of part numbers and pin extensions, applies also to type 37 GFR.	N/A All charted information be low, with the exception of part numbers end pin extensions, applies also ta type 40 GFR.	N/A All charted information be low, with the exception of part numbers end pin extensions, applies also ta type 40 GFR.
Dimension X	N/A 0.150 in
Dimension Y	N/A
Lead Outer Diameter	N/A 0.040 in
Current Rating	N/A 5.5 A	N/A 5.5 A	N/A Depends on thru lead	N/A 5.5 A	N/A 5.5 A
Voltage Rating	N/A 1150 V
Additional Information	N/A Inner leads may be flattened and pierced, this extends lead approximately 1/32". Pierced Hole diameter 0.43". Voltage and current rating for headers shown are RMS voltage at sea level with 90% humidity and maximum current for 40ºC temperature rise. Notes: Brown identification dot available on special order. 0.090" O.D. X 0.060" I.D. X 1½ long exhaust tube available in center.